Throwback Thursday # 13 Let It Snow!

I decided to create a shaker card for today's Throwback Thursday. It's been awhile since I have made one. They are especially fun for cards that involve snow.

Snow is here...that's what I hear anyway. I haven't actually seen it because it has been raining and we have a cloud cover. But, someone mentioned that Mt. Hood has some new snow on its top. The last time I saw Mt. Hood it looked like it was nearly snowless, just a great big pointy rock. The big glaciers that are usually on it year round had shrunk to the smallest patches of snow that I have ever seen on Mt. Hood. We sure need the rain and lots of snow in the mountains this year.

So, here's the snow card in celebration of the return of the snow.

The lighter spots that look like they are on the background are actually a reflection on the window sheet. The background is actually Midnight Muse card stock with snowflakes heat embossed on it.

Retired products I used:
Midnight Muse card stock
Let it Snow stamp set

Current products:
Marina Mist card stock
Whisper White card stock
snowflake die (from new Holiday catalog pillow box die set)
White embossing powder
Embossing buddy
Heat tool
Window sheet
VersaMark ink
Jet Black Stazon ink
Marina Mist ink
Marina Mist marker
Soft Sky marker
Stampin' Trimmer (to create frame for window)
Deco Label framelit dies
small rhinestone

Other products:
teeny rhinestones on label
Crystal Clear glitter (by Glitterex Corp.- purchased at craft store)
1/4" foam to create space for glitter (recycled from packaging material)

Thanks for dropping by today!
Have a blessed day,
Trude

Wednesday 101 - Rubber stamping - The Basics

Today's 101- The Basics is about stamping with a rubber stamp!

• Make sure you have a solid flat surface to stamp on.
• I like to use a foam mat. There are some sold at craft stores for this purpose, or you can use a piece of fun foam. This is optional but I think that I get better impressions when I use a pad.
• Place a piece of scrap paper over your work surface. It keeps your surface clean and you can replace it as needed. And Grid Paper (130148) works great too!
• Make sure your stamp is clean (they will be if you always give them a quick cleaning on the Stampin' Scrub (#126200) after you use them.
• Select an appropriate ink pad for the paper that you are using.
• Check the ink pad to make sure that it is clean, remove any debris. 
• Ink a stamp and stamp it on scratch paper to see if it has enough ink. You will know if the ink pad is too dry by the amount of pressure that you used to ink the stamp. If you had to put any pressure on the stamp to get a good impression on your scrap paper then your pad is definitely too dry and needs to be reinked. If even gentle pressure on the stamp causes there to be overinking on the edges of the stamp then the stamp may have too much ink on it and you can remove some of the excess ink by tapping the surface of the ink pad on a piece of scratch paper, folded in half and half again so that the excess ink doesn't seep through.
• Lay your stamp on your work surface, face up. Gently tap the ink pad over the surface. Check to make sure the surface is well inked, you should be able to see an even 'glisten' over the surface.          
  
   
• For small stamps you can lightly tap the stamp on the ink pad. Try not to get any ink on the edges of the rubber die as it may transfer to your project (when you press too hard, or rock the stamp).
  
  
•  This is what an overinked stamp looks like.
  
  See the ink above and below the sentiment on the edges of the rubber? Because this is a long narrow stamp it will be easy for me to accidentally rock the stamp as I stamp it on my project. This will create an ink line above or below my stamped sentiment...definitely not what I want.
• Now you are ready to stamp your project. Grasp the stamp firmly, you would be surprised how easy it is to drop a stamp on the middle of your project! Stamp straight down on your project. Try not to rock the stamp. Use firm pressure, but don't smash it! The larger the stamp you are using, the more pressure you will need to use. In fact I often stand to stamp a large card size image like the one that is in the first photo on this page. 
• Don't remove the stamp as soon as you stamp it. Wait for a few seconds for the ink to transfer onto the paper.
• Use one hand to keep the project on the flat surface. Lift the stamp straight off the project. Sometimes the stamps stick to the paper, that's why I hold the project down.
• Most, but not all, inks dry quickly. If you are using an ink that dries slowly, put the stamped piece aside to dry. I don't know how many times I have hurried on without allowing enough time for the ink to dry and smeared my project.
• Clean your stamp. You can use an alcohol free wipe, wash it in the sink, or use the Stampin' Scrub. Put your stamp away and it's all ready to use next time!

If your stamped image looks like the ink was not even, it could be that there are manufacturing oils still on the stamp. This happens sometimes with new stamps. You can clean it with dish soap, rinse well, dry the stamp and try again. If you are still getting a spotty image try rubbing your thumb over it. The tiny ridges on your thumb are slightly abrasive, it's like rubbing an eraser over the surface of the stamp, but more gentle. If that still doesn't work, it may be that your stamp has a low spot in the die and is defective. Contact your Stampin' Up! demonstrator (if it's a Stampin' Up! stamp) let your demonstrator know what it is doing and maybe it will need to be replaced.

That's the very basics of stamping. Thanks for stopping by today. I would love to hear your comments and if you have any questions about stamping, please contact me.

Have a blessed day,
Trude

Journal It! # 123

Journal It! 123

Today your journal prompt is:

Did you meet any of your great grandparents? What do you know or remember about them?

Write the prompt in your journal and Journal It!

________________________________________________________________________

My mother's mother had an old wringer washer that she used when I was growing up. My Father's mother had an "automatic" washer. When I was about  three and a half or four years old, my Father's grandfather (my great grandfather) told me that he didn't have a fore-arm because he had lost it in a washing machine. I didn't know what a big joker he was, that is pretty much my only memory of him. I didn't find out until I was in my twenties that it was actually a train accident that caused him to lose his fore-arm. He was the only great grandparent that I ever met.

Do you have any warm or funny memories to share about yours? We'd like to hear them.

_________________________________________________________________________

Christmas is just around the corner now. Do you have the new Holiday Catalog? I would love to be your demonstrator.

You can see the online catalog here.

Have a blessed day,
Trude

*********************************************************************
The  silver-haired head is a crown of glory, if it is found in the way of righteousness. Proverbs 16:31
*********************************************************************

Tuesday Tutorial # 12 Butterfly Basic Floral Birthday

Today's tutorial shows you how I center a stamped image in a cut out 'window'. It also features the techniques of dry embossing and die cutting. The inside is also decorated with stamped images.

I used the Basic Butterfly stamp set and the Oval collection framelit dies.

Get the tutorial now!

 

Journal It! # 122

Journal it! 122

This is your next journal prompt...

What was your favorite subject in elementary school? Your least favorite?

Write the prompt in your journal and Journal It!

Writing Notes

 I really liked Art, but I didn't have a least favorite when I was in elementary school.

Have a blessed day,
Trude
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A wise man will hear and increase learning, And a man of understanding will attain wise counsel. Proverbs 1:5
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++